Home > Machines > DGWMX503E-3-S CNC turret double station busbar machine

DGWMX503E-3-S CNC turret double station busbar machine

cnc busbar bending machineMain function:

cnc busbar punching machine

To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/ vertical bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect. Function introduction:
1. Cutting hydraulic busbar cutter unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat, no burr, no waste.
2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly whole one,improving concentric degree of moulds, prolonging the service life of the moulds,saving time of change.
3.Busbar bending unit adopts closed bending structure,making it is more uniform when processing horizontal bending and embossing. Also prolonging the service life.
4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same time while working without impact each other.
5. Adopting PLC controlled, bending angle can be cnc,and with a storage function.
6. Three units of the machine can work at the same time,not affecting each other,Improving the processing efficiency.
7. Hydraulic tank with thick plate weldin g,and is treated by phosphating, making hydraulic oil can be long time used and will not degenerate.



Max. Punching Force (KN)

Punching Diameter Range (MM)

Max. Process Thickness (MM)

To learn more about BMC's fast, productive, cnc busbar punching machine, punching & cutting & bending CNC busbar machines, contact Leanne Lee, International Sales Manager at leanne@busbarmc.com.

Home Page

Products Home Page