> 303E-3-S three pumps punching turret angle NC busbar machine
303E-3-S three pumps punching turret angle NC busbar machine
hydraulic busbar bending machine
To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/
vertical bending/ emboss/Press cable thread /twist/anti-press busbar bending cutting punching machine
flat the copper/aluminum busbar ect.
1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat,
no burr, no waste.
2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly
whole one,improving concentric degree of moulds,
prolonging the service life of the moulds,saving time of change.
3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal
bending and embossing. Also prolonging the service life.
4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same
time while working without impact each other.
5. Adopting PLC controled, bending angle can be cnc,and with a storage function.
6. Three units of the machine can work at the same time,not affecting each other,Improving the processing efficiency.
7. Hydraulic busbar bending cutting punching machine
tank with thick plate welding,and is treated by phosphating, making hydraulic oil can be long time used and will not degenerate.
12 × 160mm
Φ4.3 ~ 25mm
one table: 1500mm × 1200mm; racking: 930mm × 420mm
vertical bending maximum processing width
To learn more
about BMC's fast, productive, hydraulic busbar bending machine,punching & cutting & bending CNC
busbar machines, contact Leanne Lee, International Sales Manager