Home > Machines > 303C-3 three pumps busbar machine

303C-3 three pumps busbar machine

hydraulic busbar cutting punching bending machineMain Function:

hydraulic busbar bending cutting punching machine

To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/ vertical bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect. Function Introduction:
1. Cutting unit adopts double-column copper busbar machine shear structure (patent number: ZL201120262802.1),Cut mouth flat, no burr, no waste.
2. Single arm type structure(patent number:ZL201120262917.1) which is a totaly whole one,improving concentric degree of moulds,prolonging the service life of the moulds,saving time of change.
3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal bending and embossing. Also prolonging the service life.
4. Adopting PLC controlled,compared to the traditional relay,more stable and reliable.
5. Three units of the machine can work at the same time,not affecting each other,Improving the processing efficiency.
6. Hydraulic busbar cutter tank with thick plate welding,and is treated by phosphating, making hydraulic oil can be long time used and will not degenerate.

Specifications

Max size
12 × 160mm

punching range
Φ4.3 ~ 25mm

Work Bench Size(MM)
1400×1000

vertical bending maximum processing width
120mm

To learn more about BMC's fast, productive,hydraulic busbar bending cutting punching machine, punching & cutting & bending CNC busbar machines, contact Leanne Lee, International Sales Manager at leanne@busbarmc.com.

Home Page

Products Home Page